lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Fuel Pressure Pulsation Damper (for Direct Injection)|Page 3748 > < Fuel Pressure Pulsation Damper (for Direct Injection)|Page 3746
Page 3
background image

                 

4. REMOVE ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Removal

                 

5. REMOVE ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Removal

                 

6. DISCHARGE FUEL SYSTEM PRESSURE

(a) Discharge fuel system pressure See: Service Precautions.

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected  See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.

8. REMOVE NO. 1 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Removal

                 

9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Throttle Body/Service and Repair/Removal

                 

10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and

Replacement/Engine Assembly/Removal

                 

11. REMOVE ENGINE UNDER COVER
12. DRAIN ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair

                 

13. SEPARATE ENGINE WIRE See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

14. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and

Repair/Removal

                 

15. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal

                 

16. REMOVE NO. 3 FUEL HOSE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Removal

                 

17. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY (for Port Injection)

Fuel Pressure Pulsation Damper (for Direct Injection)|Page 3748 > < Fuel Pressure Pulsation Damper (for Direct Injection)|Page 3746