IS F V8-5.0L (2UR-GSE) (2008)
(a) Disconnect the 4 connectors.
(b) Remove the 2 bolts and wire harness.
(c) Disconnect the 4 connectors.
(d) Remove the 2 bolts and wire harness.
(e) Using SST, loosen the 2 fuel pressure pulsation dampers.
SST: 09612-24014
09617-24011
(f) Remove the fuel tube sub-assembly with the 4 gaskets.
Installation
2UR-GSE FUEL: FUEL PRESSURE PULSATION DAMPER (for Port Injection): INSTALLATION
2UR-GSE FUEL: FUEL PRESSURE PULSATION DAMPER
1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY (for Port Injection)
(a) Temporarily install the 2 fuel pressure pulsation damper assemblies together with 4 new gaskets and the fuel tube sub-assembly.