IS F V8-5.0L (2UR-GSE) (2008)
-
Make sure that the O-rings are not cut or pinched during installation.
3. INSTALL FUEL PUMP ASSEMBLY See: Fuel Pump/Service and Repair/Fuel Pump/Reassembly
4. INSTALL NO. 1 FUEL SUCTION SUPPORT See: Fuel Pump/Service and Repair/Fuel Pump/Reassembly
5. INSTALL FUEL PUMP HARNESS See: Fuel Pump/Service and Repair/Fuel Pump/Reassembly
6. TEMPORARILY INSTALL JET PUMP See: Fuel Pump/Service and Repair/Fuel Pump/Reassembly
7. INSTALL FUEL FILTER See: Fuel Pump/Service and Repair/Fuel Pump/Reassembly
8. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY See: Fuel Pump/Service and Repair/Fuel Pump/Reassembly
9. INSTALL FUEL SENDER GAUGE ASSEMBLY See: Fuel Pump/Service and Repair/Fuel Pump/Reassembly
10. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY See: Fuel Pump/Service and Repair/Fuel Pump/Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
12. INSPECT FOR FUEL LEAK See: Testing and Inspection
13. INSTALL NO. 2 REAR FLOOR SERVICE HOLE COVER See: Fuel Pump/Service and Repair/Fuel Pump/Installation
14. INSTALL NO. 3 ROOM PARTITION PAD See: Fuel Pump/Service and Repair/Fuel Pump/Installation
15. INSTALL REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly/Installation