IS F V8-5.0L (2UR-GSE) (2008)
Fuel Pump Ballast Resistor: Service and Repair
Installation
2UR-GSE FUEL: FUEL PUMP RESISTOR: INSTALLATION
2UR-GSE FUEL: FUEL PUMP RESISTOR: INSTALLATION
1. INSTALL FUEL PUMP RESISTOR
(a) Install the fuel pump resistor and engine wire with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Connect the fuel pump resistor connector and clamp.
2. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
3. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation