IS F V8-5.0L (2UR-GSE) (2008)
Camshaft Position Sensor: Service and Repair
Removal
2UR-GSE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL
2UR-GSE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolt and camshaft position sensor.
3. REMOVE VVT SENSOR (for Bank 1)
(a) Separate the 3 wire harness clamps.
(b) Disconnect the VVT sensor connectors.
(c) Remove the 2 bolts and 2 VVT sensors.
4. REMOVE VVT SENSOR (for Bank 2)
(a) Separate the wire harness clamp.