IS F V8-5.0L (2UR-GSE) (2008)
/Page-1309001.png)
Crankshaft Position Sensor: Service and Repair
Installation
2UR-GSE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION
2UR-GSE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION
1. INSTALL CRANK POSITION SENSOR
(a) Install the crank position sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the crank position sensor connector.
2. INSPECT FOR OIL LEAK
3. INSTALL NO. 2 ENGINE UNDER COVER
