IS F V8-5.0L (2UR-GSE) (2008)
Spark Plug: Service and Repair
Removal
2UR-GSE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: REMOVAL
2UR-GSE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
2. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
5. REMOVE ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
7. REMOVE BATTERY
(a) Disconnect the 2 clamps.
(b) Disconnect the cable from the positive (+) battery terminal.
(c) Remove the nut and the battery clamp.
(d) Remove the battery insulator.
(e) Remove the battery.
8. REMOVE NO. 1 BATTERY TRAY SUPPORT
9. REMOVE POWER STEERING ECU ASSEMBLY See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and Modules
- Steering/Steering Control Module/Service and Repair/Power Steering ECU/Removal
10. REMOVE BATTERY TRAY