IS F V8-5.0L (2UR-GSE) (2008)
7. INSPECT VVT RH RELAY
(a) Remove the VVT RH relay from the No. 2 relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the relay.
8. INSPECT INJ2 RELAY
(a) Remove the INJ2 relay from the No. 2 relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the relay.
9. INSPECT A/F RELAY
(a) Remove the A/F relay from the No. 2 relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the relay.
10. INSPECT F/PMP RELAY