IS F V8-5.0L (2UR-GSE) (2008)
/Page-1006002.png)
(a) Remove the 3 bolts and battery tray.
11. REMOVE WIRE HARNESS CLAMP BRACKET
(a) Remove the 2 bolts and nut and separate the No. 7 engine room relay block.
(b) Remove the bolt and separate the wire harness clamp bracket.
(c) Separate the wire harness clamp from the wire harness clamp bracket.
12. REMOVE IGNITION COIL ASSEMBLY
(a) Disconnect the 8 ignition coil connectors.
(b) Remove the 8 bolts and 8 ignition coils.
NOTICE: Do not damage the ignition coils when removing them.
13. REMOVE SPARK PLUG
(a) Using a 16 mm plug wrench, remove the 8 spark plugs.
