IS F V8-5.0L (2UR-GSE) (2008)
Electronic Brake Control Module: Service and Repair
Removal
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL ECU: REMOVAL
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL ECU: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
2. REMOVE FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
3. REMOVE FRONT DOOR OPENING TRIM COVER RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal
4. REMOVE SIDE INSTRUMENT PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
6. REMOVE SKID CONTROL ECU
(a) Disconnect the 3 connectors from the skid control ECU.
(b) Remove the 3 screws and skid control ECU.