IS F V8-5.0L (2UR-GSE) (2008)
OK -- Continue to next step.
13. CHECK HARNESS AND CONNECTOR (IG2 RELAY POWER SOURCE CIRCUIT)
(a) Remove the IG2 relay from the engine room No. 2 relay block.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
(c) Reinstall the IG2 relay.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (IG2 RELAY - BATTERY)
OK -- GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START