IS F V8-5.0L (2UR-GSE) (2008)
Seat Occupant Classification Module - Air Bag: Testing and Inspection
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: ON-VEHICLE INSPECTION
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: ON-VEHICLE INSPECTION
1. INSPECT OCCUPANT CLASSIFICATION ECU (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble
Codes/DTC Check / Clear.
2. INSPECT OCCUPANT CLASSIFICATION ECU (VEHICLE INVOLVED IN COLLISION)
(a) Perform a diagnostic system check See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble
Codes/DTC Check / Clear.
(b) Even if an airbag was not deployed, check if there is any damage to the occupant classification ECU. If there are any following defects, replace
the occupant classification ECU with a new one:
-
Cracks, dents or chips on the case.
-
Cracks or other damage to the connector.
CAUTION: Be sure to follow the correct removal and installation procedures of the occupant classification ECU.