IS F V8-5.0L (2UR-GSE) (2008)
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: REMOVAL
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: REMOVAL
1. REMOVE STEERING COLUMN ASSEMBLY
HINT: Refer to the instructions for Removal of the steering column assembly See: Steering and Suspension/Steering/Steering Column/Service
and Repair/Removal.
2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Disassembly
3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Disconnect the connector from the multiplex tilt and telescopic ECU.
(b) Remove the 2 screws and multiplex tilt and telescopic ECU.
Installation
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: INSTALLATION
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: INSTALLATION
1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
(a) Install the multiplex tilt and telescopic ECU with the 2 screws.
Torque: 1.5 Nm (15 kgf-cm, 13 in-lbf)