IS F V8-5.0L (2UR-GSE) (2008)
/Page-2093007.png)
Installation
SUPPLEMENTAL RESTRAINT SYSTEMS: CURTAIN SHIELD AIRBAG ASSEMBLY: INSTALLATION
SUPPLEMENTAL RESTRAINT SYSTEMS: CURTAIN SHIELD AIRBAG ASSEMBLY: INSTALLATION
1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Check that the engine switch is off.
(b) Check that the cable is disconnected from the negative (-) battery terminal.
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Temporarily install the curtain shield airbag assembly with the 7 hooks.
NOTICE: Do not twist the curtain shield airbag assembly when installing it.
(d) Install the 2 clams.
(e) Install 9 new bolts.
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)
HINT: Tighten the bolt in order from 1 to 9.
