IS F V8-5.0L (2UR-GSE) (2008)
(b) Using a clip remover, remove the 2 clips and occupant classification sensor.
16. REMOVE OCCUPANT CLASSIFICATION ECU See: Seat Occupant Classification Module - Air Bag/Service and Repair/Removal
Installation
SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT CUSHION ASSEMBLY (w/ Occupant Classification ECU, Occupant
Classification Sensor): INSTALLATION
SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT CUSHION ASSEMBLY
1. INSTALL OCCUPANT CLASSIFICATION ECU See: Seat Occupant Classification Module - Air Bag/Service and Repair/Installation
2. INSTALL OCCUPANT CLASSIFICATION SENSOR
(a) Install the occupant classification sensor with 2 new clips.
NOTICE:
-
Do not reuse the clip.
-
Securely install the clip.
-
Do not reuse an occupant classification sensor which has been dropped.
-
Make sure that there is no foreign matter between the occupant classification sensor and seat assembly.