IS F V8-5.0L (2UR-GSE) (2008)
Seat Occupant Classification Module - Air Bag: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL
1. PRECAUTION
CAUTION: Be sure to read Precaution thoroughly before servicing See: Air Bag Systems/Service Precautions.
NOTICE: When replacing the occupant classification ECU, perform registration See: Testing and Inspection/Programming and
Relearning/Registration.
2. REMOVE FRONT SEAT HEADREST ASSEMBLY RH
3. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly/Removal.
4. REMOVE FRONT INNER SEAT TRACK BRACKET COVER RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly/Removal.
5. REMOVE REAR OUTER SEAT TRACK BRACKET COVER RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly/Removal.
6. REMOVE REAR INNER SEAT TRACK BRACKET COVER RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly/Removal.
7. REMOVE FRONT SEAT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly/Removal.
8. REMOVE OCCUPANT CLASSIFICATION ECU
(a) Disconnect the connector from the occupant classification ECU.
NOTICE: When disconnecting the airbag connector, take care not to damage the airbag wire harness.
(b) Remove the 2 nuts and occupant classification ECU.