IS F V8-5.0L (2UR-GSE) (2008)
Repair/Removal
3. REMOVE FRONT SEAT BELT ANCHOR COVER SUB-ASSEMBLY (for RH Side) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Removal
4. SEPARATE FRONT SEAT OUTER BELT ASSEMBLY LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal
5. SEPARATE FRONT SEAT OUTER BELT ASSEMBLY RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal
6. REMOVE FRONT DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
7. REMOVE REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
8. REMOVE LOWER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
9. REMOVE CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
10. REMOVE FRONT SEAT OUTER BELT ASSEMBLY
(a) Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.
(b) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner
connector as shown in the illustration.
HINT: Tape the screwdriver tip before use.
(c) Disconnect the connector.