IS F V8-5.0L (2UR-GSE) (2008)
(e) Install the shoulder anchor of the front seat outer belt assembly with the nut.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
3. INSTALL CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
4. INSTALL LOWER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
6. INSTALL FRONT DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
7. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
8. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
9. INSTALL LAP BELT OUTER ANCHOR COVER LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
10. INSTALL FRONT SEAT BELT ANCHOR COVER SUB-ASSEMBLY (for RH Side) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: Some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming and Relearning/Repair
Instruction - Initialization.
12. INSPECT SRS WARNING LIGHT
Inspect the SRS warning light See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.