IS F V8-5.0L (2UR-GSE) (2008)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Installation
2UR-GSE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
2UR-GSE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
1. INSTALL E.F.I. ENGINE COOLANT TEMPERATURE SENSOR
(a) Install a new gasket to the E.F.I. engine coolant temperature sensor.
(b) Install the E.F.I engine coolant temperature sensor.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
(c) Connect the E.F.I. engine coolant temperature sensor connector.
2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
3. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
4. INSPECT FOR COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection
5. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
6. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
7. INSTALL ENGINE UNDER COVER