IS F V8-5.0L (2UR-GSE) (2008)
Parking Brake Warning Switch: Service and Repair
Installation
PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION
PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION
1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
(a) Install the parking brake switch assembly to the parking brake control pedal assembly with the screw.
Torque: 0.9 Nm (9 kgf-cm, 8 in-lbf)
(b) Install the tension spring to the parking brake control pedal assembly.
2. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY
(a) Install the parking brake control pedal assembly and temporarily tighten the 3 nuts.
(b) Fully tighten the 3 nuts in the order shown in the illustration.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(c) Connect the parking brake switch connector.
(d) Connect the instrument panel junction block assembly with the 2 nuts.
(e) Install the parking brake control pedal assembly to the body with the 3 nuts.