IS F V8-5.0L (2UR-GSE) (2008)
Brake Light Switch: Service and Repair
Installation
LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION
LIGHTING
1. INSTALL STOP LIGHT SWITCH ASSEMBLY
(a) Temporarily install the stop light switch assembly with the stop light switch lock nut.
(b) Turn the stop light switch assembly so that the clearance between the nut end and stop light switch cushion is between 0.5 to 2.4 mm (0.020 to
0.095 in.).
(c) Tighten the stop light switch lock nut.
Torque: 17 Nm (170 kgf-cm, 12 ft-lbf)
(d) Connect the connector.
2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Side Knee
Airbag Assembly/Installation
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
5. INSTALL SIDE INSTRUMENT PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
6. INSTALL FRONT DOOR OPENING TRIM COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation