IS F V8-5.0L (2UR-GSE) (2008)
/Page-387001.png)
Headlamp Alignment Sensor: Testing and Inspection
LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSPECTION
LIGHTING
1. INSPECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a) Connect 3 dry cell batteries (1.5 V) in series.
(b) Connect a positive (+) lead from the batteries to terminal 3 and the negative (-) lead from the batteries to terminal 1.
(c) Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.
Standard Voltage:
If the result is not as specified, replace the front height control sensor sub-assembly LH.
2. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
