IS F V8-5.0L (2UR-GSE) (2008)
Oil Temperature Sensor For ECM: Service and Repair
Removal
2UR-GSE ENGINE CONTROL: ENGINE OIL TEMPERATURE SENSOR: REMOVAL
2UR-GSE ENGINE CONTROL: ENGINE OIL TEMPERATURE SENSOR: REMOVAL
1. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY
(a) Remove the engine oil pressure switch assembly See: Sensors and Switches - Engine/Oil Pressure Sender/Service and Repair/Removal.
2. REMOVE OIL TEMPERATURE SENSOR
(a) Disconnect the temperature sensor connector.
(b) Using SST, remove the temperature sensor and gasket.
SST: 09922-10010
NOTICE:
-
Do not subject the temperature sensor to any impacts.
-
If the sensor is subjected to an impact, replace the temperature sensor with a new one.