IS F V8-5.0L (2UR-GSE) (2008)
Neutral Safety Switch: Service and Repair
Installation
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: INSTALLATION
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: INSTALLATION
1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Install the switch to the manual valve shaft.
(b) Temporarily install the bolt.
(c) Install a new lock washer with the nut.
Torque: 6.9 Nm (70 kgf-cm, 61 in-lbf)
(d) Temporarily install the control shaft lever with shifting rod.
(e) Turn the control shaft lever counterclockwise until it stops, and then turn it clockwise 2 notches to set it to N.