IS F V8-5.0L (2UR-GSE) (2008)
Ignition Switch: Service and Repair
Installation
2UR-GSE STARTING: ENGINE SWITCH: INSTALLATION
2UR-GSE STARTING: ENGINE SWITCH: INSTALLATION
1. INSTALL ENGINE SWITCH
(a) Attach the 2 claws to install the switch.
(b) Connect the switch connector.
2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) See: Accessories and
Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Installation
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) See: Accessories and Optional Equipment/Radio,
Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Installation
4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
6. INSTALL CONSOLE BOX See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
7. INSTALL CONSOLE BOX REGISTER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
8. INSTALL REAR ASH RECEPTACLE ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
9. INSTALL FRONT ASH RECEPTACLE ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
10. INSTALL CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
12. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and