IS F V8-5.0L (2UR-GSE) (2008)
(c) Connect the 4 brushes.
(d) Align the starter commutator end frame rubber with the groove of the starter yoke assembly.
(e) Install the starter commutator end frame assembly with the 2 screws.
Torque: 3.8 Nm (39 kgf-cm, 33 in-lbf)
6. INSTALL STARTER DRIVE HOUSING ASSEMBLY
(a) Apply high-temperature grease to the starter pinion drive lever, as shown in the illustration.
(b) Install the starter pinion drive lever to the starter center bearing clutch sub-assembly.