IS F V8-5.0L (2UR-GSE) (2008)
(c) Align the claw of the starter yoke assembly with the groove inside the starter drive housing assembly.
(d) Using a T30 "TORX" socket wrench, install the starter drive housing assembly with the 2 bolts.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
7. INSTALL STARTER MAGNETIC SWITCH ASSEMBLY
(a) Temporarily install the starter magnetic switch assembly by hooking its tip to the upper side of the starter pinion drive lever.
(b) Install the 2 nuts.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
(c) Connect the lead wire to the terminal with the nut.
Torque: 6.5 Nm (66 kgf-cm, 57 in-lbf)