IS F V8-5.0L (2UR-GSE) (2008)
POWER ASSIST SYSTEMS: POWER STEERING ECU: INSTALLATION
POWER ASSIST SYSTEMS: POWER STEERING ECU: INSTALLATION
1. INSTALL POWER STEERING ECU ASSEMBLY
(a) Install the power steering ECU assembly to the battery tray with the 3 bolts.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
(b) Connect the connectors (A), (B) and (C) to the power steering ECU assembly.
(c) Securely lock the connectors (A) and (B).
2. INSTALL NO. 1 BATTERY TRAY SUPPORT
3. INSTALL BATTERY
(a) Install the battery.
(b) Install the battery insulator.
(c) Install the battery clamp with a nut.
Torque: 2.9 Nm (30 kgf-cm, 26 in-lbf)
(d) Connect the cable to the positive (+) battery terminal.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(e) Connect the 2clamps.
(f) Connect the cable to the negative (-) battery terminal.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.