IS F V8-5.0L (2UR-GSE) (2008)
Steering Column Lock: Initial Inspection and Diagnostic Overview
How to Proceed With Troubleshooting
STEERING COLUMN: STEERING LOCK SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
STEERING COLUMN: STEERING LOCK SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
-
Perform troubleshooting in accordance with the following flowchart.
-
*: Use the Techstream.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
NEXT -- Continue to next step.
3. CHECK AND CLEAR DTCs*
NEXT -- Continue to next step.
4. PROBLEM SYMPTOM CONFIRMATION
Result:
B -- GO TO STEP 6
A -- Continue to next step.
5. SYMPTOM SIMULATION
NEXT -- Continue to next step.
6. CHECK CAN COMMUNICATION SYSTEM*
HINT: Check that there are no problems in the CAN communication system before troubleshooting the steering lock system.
NEXT -- Continue to next step.
7. DTC CHECK*
(a) Check for DTCs See: Reading and Clearing Diagnostic Trouble Codes.
Result:
A -- GO TO STEP 9
B -- Continue to next step.
8. PROBLEM SYMPTOMS TABLE
Result:
B -- GO TO STEP 10
A -- Continue to next step.
9. DTC CHART
NEXT -- Continue to next step.
10. CIRCUIT INSPECTION*
NEXT -- Continue to next step.
11. PROBLEM IDENTIFICATION
NEXT -- Continue to next step.
12. REPAIR OR REPLACEMENT