IS F V8-5.0L (2UR-GSE) (2008)
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (STEERING LOCK ACTUATOR ASSEMBLY - BATTERY)
(a) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (STEERING LOCK ACTUATOR ASSEMBLY - BATTERY)
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
Unlock Position Sensor Signal Circuit
STEERING COLUMN: STEERING LOCK SYSTEM: Unlock Position Sensor Signal Circuit
Unlock Position Sensor Signal Circuit
DESCRIPTION
The unlock position sensor is one of the components comprising the steering lock actuator. The sensor switch contact closes when the steering lock is
released. The steering lock release signal is then sent to the power source control ECU. Upon receiving the signal, the ECU permits engine start. This
prevents the engine from being started with the steering locked.
WIRING DIAGRAM
INSPECTION PROCEDURE