2008 Lexus IS F V8-50L Ball Joint Service and Repair Guide
NOTICE: As SST may be damaged, make sure that the clearance between the arm and spacers is less than 1 mm (0.0394 in.).
(d) Using SST, separate the tie rod end from the front lower ball joint as shown in the illustration.
SST: 09960-20010
09961-02010
CAUTION: Apply grease to the threads and end of the SST bolt.
NOTICE:
-
Be sure to tighten the string firmly to secure SST to the coil spring to prevent SST from falling off.
-
Install SST so that A and B are parallel.
-
Be sure to place a wrench on the part indicated in the illustration.
-
Do not damage the front lower ball joint dust cover.
7. REMOVE FRONT LOWER BALL JOINT ASSEMBLY
(a) Remove the clip and nut.
(b) Install 2 spacers (SST spacer A) onto the front lower ball joint as shown in the illustration.
SST: 09960-20010
09961-02050
09961-02050
09961-02010