IS F V8-5.0L (2UR-GSE) (2008)
REAR SUSPENSION: REAR LOWER ARM: REMOVAL
REAR SUSPENSION: REAR LOWER ARM: REMOVAL
HINT:
-
Use the same procedure for the RH side and LH side.
-
The procedure listed below is for the LH side.
1. REMOVE REAR WHEEL
2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR See: Suspension Strut / Shock Absorber/Service and Repair/Rear Shock
Absorber/Removal
3. REMOVE REAR SUSPENSION MEMBER BRACE See: Suspension Strut / Shock Absorber/Service and Repair/Rear Shock Absorber/Removal
4. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY
(a) Support the rear axle assembly with a jack using a wooden block.
(b) Remove the 2 bolts, 2 nuts, and rear No. 1 suspension arm assembly.
NOTICE: Turn the bolts while holding the nuts.
5. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY
(a) Support the rear axle assembly with a jack using a wooden block.
(b) Remove the bolt and nut (C), and separate the rear stabilizer link assembly and the height control sensor link bracket.
(c) Remove the bolt (B) and nut, and separate the rear shock absorber with coil spring.
NOTICE: Turn the bolt while holding the nut.
(d) Remove the nut and bolt (A), and separate the rear No. 2 suspension arm assembly.
NOTICE: Turn the bolt while holding the nut.
(e) Remove the bolt and nut (D), and remove the rear No. 2 suspension arm assembly.
Installation