IS F V8-5.0L (2UR-GSE) (2008)
Front Cross-Member: Service and Repair
Removal
FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL
FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL
1. REMOVE ENGINE WITH TRANSMISSION ASSEMBLY
HINT: Remove the engine with transmission assembly. See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. INSTALL ENGINE HANGERS See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE OIL LEVEL DIPSTICK
4. REMOVE OIL LEVEL DIPSTICK GUIDE See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and Repair/Removal
5. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
6. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
7. REMOVE NO.1 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service
and Repair/Removal
8. REMOVE NO.2 EXHAUST MANIFOLD HEAT INSULATOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service
and Repair/Removal
9. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine Assembly/Removal
10. REMOVE FRONT ENGINE MOUNTING INSULATOR See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
11. REMOVE FRONT STABILIZER BAR
(a) Remove the 2 nuts and the front stabilizer bar.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
12. SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY LH