IS F V8-5.0L (2UR-GSE) (2008)
CAUTION: Apply grease to the threads and end of the SST bolt.
NOTICE:
-
Install SST so that A and B are parallel.
-
Be sure to place a wrench on the part indicated in the illustration.
-
Make sure that SST is securely positioned on the rear axle carrier spacer.
-
Use caution not to damage the rear axle carrier sub-assembly because it is made of aluminum and may be damaged easily.
-
Do not damage the ball joint dust cover.
-
Make sure that the SST string is securely tied to the vehicle.
If the rear axle carrier spacer has come off, replace the rear axle carrier sub-assembly with a new one.
(d) Put matchmarks on the toe adjust plate and rear suspension member.
(e) Remove the nut, toe adjust cam, toe adjust plate, and toe control link sub-assembly.