IS F V8-5.0L (2UR-GSE) (2008)
(a) Temporarily Install the front stabilizer bar, front No. 2 stabilizer bracket LH and front No. 2 stabilizer bracket RH with the vehicle.
NOTICE: The identification mark must be on the right side of the vehicle when installing the front stabilizer bar.
5. INSTALL FRONT NO. 2 STABILIZER BRACKET LH
(a) Install the front No. 2 stabilizer bracket LH on the vehicle with the 2 bolts.
Torque: 49 Nm (500 kgf-cm, 36 ft-lbf)
6. INSTALL FRONT NO. 2 STABILIZER BRACKET RH
HINT: Install the RH side following the same procedure as the LH side.
7. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
(a) Install the front stabilizer link assembly LH with the 2 nuts.
Torque: 84 Nm (857 kgf-cm, 62 ft-lbf)
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
8. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: Install the RH side following the same procedure as the LH side.
9. INSTALL FRONT HEIGHT CONTROL SENSOR LINK ASSEMBLY