IS F V8-5.0L (2UR-GSE) (2008)
CAUTION: Apply grease to the threads and end of the SST bolt.
NOTICE:
-
Be sure to tighten the string firmly to secure SST to the front upper suspension arm to prevent SST from falling off.
-
Install SST so that A and B are parallel.
-
Be sure to place a wrench on the part indicated in the illustration.
-
Do not damage the front upper suspension arm dust cover.
NOTICE: If the steering knuckle spacer has come off, replace the steering knuckle with a new one.
10. SEPARATE FRONT SHOCK ABSORBER WITH COIL SPRING
(a) Support the front lower suspension arm with a jack.
NOTICE: Be sure to place a wooden block between the jack and the front lower suspension arm to avoid damage.
(b) Remove the nut while holding the bolt.
NOTICE: Do not remove the bolt.
11. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING
(a) Loosen the lock nut of the front shock absorber.
NOTICE:
-
Do not remove the lock nut.
-
Loosen the lock nut only when disassembling the front shock absorber with coil spring.