IS F V8-5.0L (2UR-GSE) (2008)
AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT
AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT
HINT:
-
Use the same procedure for the RH side and LH side.
-
The procedure listed below is for the LH side.
1. REMOVE FRONT WHEEL
2. SEPARATE FRONT DISC BRAKE CYLINDER ASSEMBLY See: Suspension/Suspension Strut / Shock Absorber/Service and Repair/Front
Shock Absorber/Removal
3. REMOVE FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Front Brake/Removal
4. REMOVE FRONT AXLE HUB BOLT
(a) Temporarily install 2 nuts and 2 washers to the front axle hub bolt as shown in the illustration.
HINT: Install hub nuts to prevent damage to the hub bolts.
(b) Using SST and a screwdriver or an equivalent tool to hold the front axle hub and bearing assembly, remove the front axle hub bolt.
SST: 09628-10011
NOTICE: Do not damage the threads of the front axle hub bolts.
5. INSTALL FRONT AXLE HUB BOLT
(a) Install a washer and nut to a new front axle hub bolt as shown in the illustration.
(b) Using a screwdriver or an equivalent tool to hold the front hub axle and bearing assembly, install the front axle hub bolt by tightening the nut.
NOTICE: Do not damage the threads of the front axle hub bolts.
HINT: Install hub nuts to prevent damage to the hub bolts.
6. INSTALL FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Front Brake/Installation
7. INSTALL FRONT DISC BRAKE CYLINDER ASSEMBLY See: Suspension/Suspension Strut / Shock Absorber/Service and Repair/Front Shock