IS F V8-5.0L (2UR-GSE) (2008)
(b) Remove the nut and separate the floor shift gear shifting rod sub-assembly.
20. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
(a) Disconnect the 2 connectors.
(b) Remove the 4 clamps.
(c) Remove the 4 bolts.
(d) Remove the floor shift assembly.
Installation
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION
1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY
(a) Install the floor shift assembly with the 4 bolts.
Torque: 8.3 Nm (85 kgf-cm, 73 in-lbf)
(b) Connect the 4 clamps to the floor shift assembly.
(c) Connect the 2 connectors to the floor shift assembly.
2. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY