IS F V8-5.0L (2UR-GSE) (2008)
Wiring Harness: Service and Repair
Removal
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL
1. REMOVE NO. 2 ENGINE UNDER COVER
2. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY See: Valve Body/Service and Repair/Removal and
Replacement/Removal
3. DRAIN AUTOMATIC TRANSMISSION FLUID See: Valve Body/Service and Repair/Removal and Replacement/Removal
4. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY See: Valve Body/Service and Repair/Removal and
Replacement/Removal
5. REMOVE VALVE BODY OIL STRAINER ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Removal
6. REMOVE TRANSMISSION VALVE BODY ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Removal
7. REMOVE TRANSMISSION WIRE
(a) Disconnect the 3 speed sensor connectors.
(b) Disconnect the wire connector.
HINT: Detach the claw, press down the lever, and then disconnect the transmission wire connector.
(c) Using a 10 mm union nut wrench, remove the bolt and pull out the transmission wire.
(d) Remove the O-ring from the transmission wire connector.