IS F V8-5.0L (2UR-GSE) (2008)
4. REMOVE NO. 1 DIFFERENTIAL SUPPORT PROTECTOR
HINT: Perform the same procedure as the No. 2 differential support protector.
5. REMOVE REAR SUSPENSION MEMBER BRACE LH See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service
and Repair/Rear Shock Absorber/Removal
6. REMOVE REAR SUSPENSION MEMBER BRACE RH
HINT: Perform the same procedure as the LH side.
7. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair/Removal
8. REMOVE REAR AXLE SHAFT NUT LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal
9. REMOVE REAR AXLE SHAFT NUT RH
HINT: Perform the same procedure as the LH side.
10. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY LH See: Brakes and Traction Control/Parking Brake System/Service and
Repair/Disassembly
11. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY RH
HINT: Perform the same procedure as the LH side.
12. REMOVE REAR DISC (for LH Side) See: Brakes and Traction Control/Disc Brake System/Service and Repair/Rear Brake/Removal
13. REMOVE REAR DISC (for RH Side)
HINT: Perform the same procedure as the LH side.
14. SEPARATE REAR SPEED SENSOR LH See: Drive Axles, Bearings and Joints/Wheel Hub/Service and Repair/Rear Axle Hub/Removal
15. SEPARATE REAR SPEED SENSOR RH
HINT: Perform the same procedure as the LH side.
16. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Remove the 3 bolts and disengage the 2 clamps.