IS F V8-5.0L (2UR-GSE) (2008)
27. LOOSEN REAR SHOCK ABSORBER BOLT (for RH Side)
HINT: Perform the same procedure as the LH side.
28. SEPARATE REAR STABILIZER LINK ASSEMBLY LH See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Rear Upper
Arm/Removal
29. SEPARATE REAR STABILIZER LINK ASSEMBLY RH
HINT: Perform the same procedure as the LH side.
30. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH See: Drive Axles, Bearings and Joints/Wheel Hub/Service and Repair/Rear
Axle Hub/Removal
31. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
HINT: Perform the same procedure as the LH side.
32. REMOVE REAR AXLE ASSEMBLY LH See: Drive Axles, Bearings and Joints/Wheel Hub/Service and Repair/Rear Axle Hub/Removal
33. REMOVE REAR AXLE ASSEMBLY RH
HINT: Perform the same procedure as the LH side.
34. REMOVE REAR DRIVE SHAFT ASSEMBLY LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal
35. REMOVE REAR DRIVE SHAFT ASSEMBLY RH
HINT: Perform the same procedure as the LH side.
36. REMOVE HOLE SNAP RING See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal
37. REMOVE REAR STABILIZER BAR See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Rear Stabilizer Bar/Removal
38. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY
(a) Support the rear differential carrier assembly with a jack.
NOTICE: Do not drop the differential carrier.
(b) Using a hexagon wrench (12 mm), remove the 3 hexagon bolts.
(c) Remove the 2 bolts, 2 lower rear differential mount stoppers and rear differential carrier assembly.
(d) Remove the 2 upper rear differential mount stoppers from rear differential carrier assembly
NOTICE: Make sure not to install the upper and lower rear differential mount stoppers upside down.