IS F V8-5.0L (2UR-GSE) (2008)
/Page-1448002.png)
(a) Remove the 4 nuts and outside air guide plate RH.
10. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(a) Using SST, loosen the adjusting nut until it can be turned by hand.
SST: 09922-10010
HINT: Use 2 of the same SST.
(b) Put matchmarks on the transmission companion flange, flexible coupling and intermediate shaft.
(c) Remove the 3 bolts, 3 washers and 3 nuts.
NOTICE: Do not separate the propeller shaft and flexible coupling.
(d) Put matchmarks on the differential companion flange, flexible coupling and propeller shaft.
(e) Remove the 3 bolts, 3 washers and 3 nuts.
NOTICE: Do not separate the propeller shaft and flexible coupling.
