IS F V8-5.0L (2UR-GSE) (2008)
Transmission Speed Sensor: Service and Repair
Installation
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION
1. INSTALL SPEED SENSOR SP2
(a) Install the speed sensor to the transmission case with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the sensor connector.
2. INSTALL SPEED SENSOR NC3
(a) Install the speed sensor to the transmission case with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the sensor connector.
3. INSTALL SPEED SENSOR NT
(a) Coat a new O-ring with ATF and install it to the speed sensor.
(b) Using a T30 ''TORX'' wench, install the speed sensor with the bolt.
Torque: 6.8 Nm (69 kgf-cm, 60 in-lbf)
(c) Connect the sensor connector.
4. INSTALL TRANSMISSION VALVE BODY ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal
and Replacement/Installation
5. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/Installation
6. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/Installation
7. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and