IS F V8-5.0L (2UR-GSE) (2008)
/Page-1494006.png)
(a) Remove the transmission control switch connector from the floor shift assembly.
(b) Remove the shift lever support and lock pin from the floor shift assembly.
(c) Remove the shift lever guide housing from the floor shift assembly.
NOTICE: First remove the shift lever nut and lock pin, then disengage the 2 claws.
(d) Remove the transmission control switch from the shift lever guide housing.
Installation
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION CONTROL SWITCH: INSTALLATION
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION CONTROL SWITCH: INSTALLATION
1. INSTALL TRANSMISSION CONTROL SWITCH
(a) Apply MP grease to the hatched area of the shift lever guide housing as indicated in the illustration.
