IS F V8-5.0L (2UR-GSE) (2008)
-
Do not keep any of the opened Primer G for later use.
HINT: If an area other than specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(b) Install the windshield outside moulding, as shown in the illustration.
Standard Dimension:
4. INSTALL WINDSHIELD GLASS ADHESIVE DAM
(a) Using a brush or sponge, coat the application area of the windshield glass adhesive dam with Primer G.
NOTICE:
-
Do not apply too much primer.
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
-
Install a new adhesive dam along the ceramic notches.
HINT: If an area other than specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(b) Install a new adhesive dam onto the windshield glass, as shown in the illustration.
Standard Dimension:
NOTICE: Install a new adhesive dam along the dam reference line.
5. INSTALL WINDSHIELD GLASS