LS 400 V8-4.0L (1UZ-FE) (1990)
(b) Remove four bolts and the regulator.
19. REMOVE DOOR LOCK
(a) Remove door lock connector from panel and disconnect it from wire harness.
(b) Disconnect the two links from the outside handle and key cylinder.
(c) Disconnect the wire harness from the clamp of the door lock.
(d) Remove three screws and the door lock.
20. REMOVE OUTSIDE HANDLE AND KEY CYLINDER
(a) Disconnect the connector from the key cylinder.
(b) Remove the handle with the two bolts.
(c) Remove the key cylinder bolt, turn the whole cylinder clockwise and remove it.
21. REMOVE FRONT DOOR OUTSIDE MOULDING