LS 400 V8-4.0L (1UZ-FE) (1990)
(b) Apply MP grease to the sliding surface of the door lock.
(c) Apply MP grease to the door glass guide rollers.
(d) Apply MP grease to the inner side of guide rails.
2. INSTALL FRONT DOOR OUTSIDE MOULDING
INSTALLATION
(a) Check that the clips and retainers are installed on the outside moulding.
(b) Align the clips and retainers with the holes of the door panel.
(c) Tap the moulding by hand to install it.
(d) Install the three screws and a nut.