LS 400 V8-4.0L (1UZ-FE) (1990)
/Page-333006.png)
(C) Using SST 09213-70010 and 09330-00021, install and torque the pulley bolt.
Torque: 2,500 kg.cm. (181 ft.lb., 245 Nm).
10. Install RT camshaft timing pulley.
(a) Align the knock pin on the camshaft with the knock pin groove of the timing pulley.
(b) Slide the timing pulley, facing the "RH" mark forward.
(c) Using SST 09278-54012, install and torque the pulley bolt.
Torque: 1,100 kg.cm. (80 ft.lb., 108 Nm).
11. Install LH camshaft timing pulley.
(a) Align the knock pin on the camshaft with the knock pin groove of the timing pulley.
(b) Slide the timing pulley, facing the "LH" mark forward.
(c) Using SST 09278-54012, install and torque the pulley bolt.
Torque: 1,100 kg.cm. (80 ft.lb., 108 Nm).
12. Set No.1 cylinder to TDC/compression.
