LS 400 V8-4.0L (1UZ-FE) (1990)
/Page-331011.png)
Remove the 4 bolts, timing belt cover and gaskets.
38. Remove timing belt cover.
Remove the cover spacer and gasket.
39. Remove timing belt guide (No.1 crank angle sensor plate).
40. Remove timing belt.
HINT: (Re-using timing belt) If the installation marks have disappeared, place a new installation mark on the timing belt to match the drilled
mark of the crankshaft timing pulley.
41. Remove No.2 idler pulley.
