LS 400 V8-4.0L (1UZ-FE) (1990)
NOTICE: Cap the open fittings immediately to keep moisture out of the system.
7. REMOVE DRAIN HOSE CLAMP FROM FRONT SIDE MEMBER
8. REMOVE HEATER TO REGISTER NO.4 AND NO.5 DUCTS
See steps 1 and 2 on the "Passenger's Side Vent Ducts and Register".
9. REMOVE MIRROR CONTROL ECU
10. REMOVE CONNECTOR BRACKET
(a) Remove the two bolts and the bracket from the cooling and blower unit.
(b) Disconnect connectors.
11. DISCONNECT VEHICLE SIDE WIRE HARNESS FROM COOLING AND BLOWER UNIT